Global supply
Solar Street Light Supplier for Africa, South America, the Middle East & Southeast Asia
The same specification does not behave identically in Lagos, Lima, Riyadh and Manila. Autonomy days, wind loading, temperature band and corrosion exposure all change with the destination — and so should the product. This page sets out how Mast Lighting configures equipment for each priority export region.
Why regional fit decides whether an installation survives
Outdoor lighting fails in predictable ways. A battery sized on annual average sunshine goes flat during the wet season. A pole engineered for ordinary wind bends in a typhoon. A luminaire without proper thermal design loses output years early in sustained heat. None of these are manufacturing defects — they are specification decisions made before anything was built.
Mast Lighting is an integrated manufacturer with in-house research and development, production, engineering contracting and independent import and export rights. Because the specification is set in the same building where the product is made, regional adjustments — capacity, wall thickness, ingress rating, control strategy — are ordinary practice rather than a special request. Every configuration is confirmed by a free Dialux lighting design before production.
Supply credentials
- · TÜV Rheinland audited supplier · MIC-ASI264744
- · ISO9001 quality management with stage-by-stage inspection
- · Independent import and export rights — direct factory shipment
- · 3-year warranty on solar street lights
- · OEM/ODM customization for importers and brand owners
At a glance
Regional condition to product response
| Region | Dominant condition | Product response |
|---|---|---|
| Africa | Off-grid roads, high heat, dust | Solar street lights, extended LiFePO4 autonomy, IP66 |
| South America | Varied irradiance, tender compliance | Dialux-verified design, latitude-matched panel and battery sizing |
| Middle East | Extreme heat, dust, megaprojects | High-efficacy LED, 20–60m high masts, smart controls |
| Southeast Asia | Typhoon wind, monsoon cloud, humidity | Grade 12 wind-rated galvanized poles, extended autonomy |
Export market
Africa
Mast Lighting supplies solar street lights engineered for off-grid roads, sustained high heat and long dry seasons followed by concentrated rainfall.
Conditions that drive the specification
- Grid supply is absent or unreliable on the roads that need lighting most
- Ambient temperatures push battery and driver electronics toward their limits
- Dust loading reduces photovoltaic yield between cleaning intervals
- A short, intense wet season demands more autonomy than annual averages suggest
How Mast Lighting configures for Africa
| Product | All-in-one and split solar street lights, 50W–300W |
|---|---|
| Storage | LiFePO4, 5–8 year service life, capacity sized to the wet season |
| Autonomy | 3–7 rainy days as standard; higher capacity specified on request |
| Environment | IP65/IP66, −40°C to 65°C operating band |
| Mounting | Hot-dip galvanized poles, 6m–12m |
Export market
South America
Mast Lighting configures lighting for a continent that runs from Andean cold to Amazonian humidity, where municipal and highway work is usually tendered against a written lighting class.
Conditions that drive the specification
- Solar irradiance varies sharply between coastal, highland and rainforest sites
- Municipal and highway tenders specify illuminance and uniformity, not product names
- EPC contractors need documentation that satisfies the awarding authority
- Temperature swings between highland day and night stress battery chemistry
How Mast Lighting configures for South America
| Design | Free Dialux simulation demonstrating compliance with the tender lighting class |
|---|---|
| Sizing | Battery capacity and panel power set to site latitude and irradiance |
| System voltage | 12V or 24V configurations |
| Range | Solar and mains LED road lighting, high masts, poles and traffic structures |
| Support | Engineering contracting experience across municipal, landscape and sports facility works |
Export market
Middle East
Mast Lighting supplies high-efficacy LED road lighting and high mast systems for extreme heat, dust exposure and large infrastructure programmes.
Conditions that drive the specification
- Sustained ambient heat reduces luminaire life if thermal design is inadequate
- Sand and dust demand robust ingress protection and accessible maintenance
- Interchanges, ports and industrial zones require wide-area, high-mast illumination
- Smart-city programmes expect dimming, monitoring and control interfaces
How Mast Lighting configures for Middle East
| Efficacy | LED street lights reaching 200–220 lm/W, 120W–320W modular |
|---|---|
| Thermal | Die-cast aluminium housings with dedicated heat-dissipation design |
| High mast | 20m–60m masts for interchanges, ports, airports and logistics parks |
| Controls | Timer, photocell, PIR, dimming, remote monitoring and fault alarm options |
| Protection | IP65 luminaires, hot-dip galvanized structures |
Export market
Southeast Asia
Mast Lighting engineers pole structures and autonomy for typhoon wind loading, monsoon overcast periods and fast-moving urban and transit build-out.
Conditions that drive the specification
- Typhoon season imposes structural wind loads far above ordinary design cases
- Monsoon cloud cover extends the required solar autonomy period
- Constant humidity accelerates corrosion of unprotected steelwork
- Distributors compete on price and need factory-direct cost structures
How Mast Lighting configures for Southeast Asia
| Structure | Hot-dip galvanized poles engineered to withstand Grade 12 typhoon wind |
|---|---|
| Autonomy | Extended LiFePO4 capacity for consecutive overcast days |
| Protection | IP66 sealing available on solar street light configurations |
| Range | Garden lights and traffic signal poles for urban and transit projects |
| Commercial | Factory-direct supply under our own import and export rights |
Ordering process
How an export order runs
-
1 · Requirements
Road or area dimensions, mounting height, lighting class, grid availability, destination port and quantity.
-
2 · Free Dialux design and quotation
A photometric simulation and a costed configuration, with the sizing assumptions stated so they can be reviewed.
-
3 · Production with staged inspection
Incoming material, in-process, ageing and pre-shipment checks under ISO9001 management.
-
4 · Export, installation and after-sales
Direct shipment under our own export rights, installation guidance, commissioning support and a 3-year solar warranty.
Export questions
Questions from overseas buyers
Product-level questions are answered on each product page; commercial terms are covered in the full FAQ.
Do you supply solar street lights to Africa, South America, the Middle East and Southeast Asia?
How long do solar street light batteries last in hot climates?
How many rainy days of backup should I specify for my region?
How do solar street lights work?
What is the best mounting height for street lights in these markets?
How much do solar street lights cost for an export project?
Tell us the destination and we will size the system for it
Country, project type, quantity and road dimensions are enough to start. We return a configuration matched to local conditions, a Dialux simulation and factory-direct pricing.