Private-label manufacturing
OEM & ODM Outdoor Lighting Manufacturing — Custom Solar & LED Street Lights
Mast Lighting manufactures under customer brands as well as our own. OEM means you own the design and we build it; ODM means you start from a proven Mast Lighting platform and we adapt the specification to your market. Both run through the same audited factory, with research and development, production, engineering and export inside one organisation.
OEM or ODM — which route fits your business
Most private-label enquiries fall into two shapes. A brand owner already has a defined product and needs a factory that can build it accurately at price — that is OEM. An importer or distributor needs a competitive product line in a specific market quickly, with the technical decisions made by someone who understands the conditions — that is ODM. Mast Lighting operates both.
| Dimension | OEM | ODM |
|---|---|---|
| Design ownership | Yours — we build to your drawings and specification | Ours — you select and adapt a proven Mast Lighting platform |
| Typical buyer | Brand owners with an existing product definition | Importers and distributors entering a market quickly |
| Engineering input | We advise on manufacturability, thermal design and compliance | We adapt wattage, optics, storage, pole and controls to your market |
| Branding | Logo on housing, panel and packaging, private-label documentation | Logo on housing, panel and packaging, private-label documentation |
| Time to first shipment | Longer — sample and tooling confirmation required | Shorter — the platform already exists |
Manufacturing base
- · Established 2021 in Gaoyou, Yangzhou, Jiangsu
- · TÜV Rheinland audited supplier · MIC-ASI264744
- · ISO9001 quality management with staged inspection
- · In-house R&D on LED source design, heat dissipation and light efficiency
- · Independent import and export rights for direct global supply
- · Quality control and certifications
Customization matrix
What you can specify
Every product is manufactured to order rather than picked from stock, so the parameters below are open on essentially the whole range — solar street lights, LED street lights, high mast lights, lighting poles, garden lights, traffic structures, photovoltaic modules and LiFePO4 storage.
Light source
- LED wattage from 50W to 300W (solar) and 120W to 320W (mains LED)
- Colour temperature and driver specification
- Optical distribution and beam aiming for the road geometry
Solar & storage
- LiFePO4 battery capacity and autonomy days
- Photovoltaic panel power matched to local peak sun hours
- 12V or 24V system voltage
- Nightly runtime and dimming profile
Structure
- Pole height 6m, 8m, 10m, 12m and custom
- Taper square or round sections, anchor bolt bases
- Hot-dip galvanized finish; painted or powder-coated on request
- High mast structures from 20m to 60m
Controls
- Automatic light control and timer control
- PIR motion sensing and intelligent dimming
- Remote control and app monitoring
- Fault alarms and hybrid solar/grid switching
Branding
- Logo printing on lamp housing
- Logo on the solar panel
- Custom carton and packaging artwork
- Private-label datasheets and catalogues
Workflow
From enquiry to bulk production
- 01
Requirement analysis
You send the target market, application, quantity expectation and any existing drawings or reference products. We identify what must be engineered and what already exists.
- 02
Free Dialux design & proposal
For project-driven orders we run a photometric simulation, then return a specification proposal and quotation with the sizing assumptions stated openly.
- 03
Sample confirmation
A sample is produced against the agreed specification for your approval, including branding placement and packaging where relevant.
- 04
Mass production
Manufacturing under ISO9001 management with inspection at incoming material, in-process, ageing and pre-shipment stages.
- 05
Export & after-sales
Shipment under our own import and export rights, with installation guidance, commissioning support, remote troubleshooting and warranty service.
Available range
Products offered under OEM/ODM
All eight product lines are available for private-label supply. A distributor building a market-entry line typically starts with solar street lights and poles; a brand owner extending an existing catalogue usually begins with a single luminaire family.
Application-driven configurations are described on the lighting solutions pages, and regional adaptation is covered under export markets.
- Solar Street Light
All-in-one and all-in-two solar street lights in a 50W–300W range, with LiFePO4 storage and project-specific panels, poles and controls.
- LED Street Light
AC LED street lights with supplier-listed 120W, 240W and 320W options, IP65 protection and 3000–6500 K CCT choices; final configurations confirmed by project.
- High Mast Light
High mast lighting for large-area projects, with original supplier photos, qualified luminaire specifications and project-specific mast engineering requirements.
- Lighting Pole
Galvanized steel lighting poles supplied through Mast Lighting, with qualified size, material and finish references. Final structure and supply scope require project-specific confirmation.
- Garden Light
Decorative garden lights for parks, residential grounds and walkways, with original supplier photos and electrical, pole and finish details for project review.
- Traffic Signal Light Pole
Traffic signal pole supply with drawing-based review of geometry, finish and equipment loads. Signal heads and accessories require separate scope confirmation.
- Solar Panel
Monocrystalline solar panels for lighting and renewable energy inquiries, with original supplier photos and model-specific electrical review before quotation.
- Lithium Battery
Lithium-battery sourcing for solar lighting, with original supplier photos, qualified specifications and model-specific compatibility review before quotation.
OEM/ODM questions
Before you commit
Sizing questions are answered by the solar street light calculator; further commercial terms are covered in the FAQ.
What is the difference between OEM and ODM at Mast Lighting?
Can I put my own logo and branding on the products?
Which technical parameters can be customized?
What is the minimum order quantity for an OEM or ODM order?
Do you provide free lighting design for custom projects?
Can I visit the factory or arrange a sample order before committing?
Send your specification or your market requirement
Drawings, a reference product, or simply the market and quantity you have in mind — either is enough to start an OEM/ODM discussion. We reply with a route, a specification proposal and pricing.